Customize your package ?

[smallhumans]

Hi :) Thx for your package, i have a request.

Which Syntax?:

IOS classic

New Feature Description:

I'm newbie in GitHub but is-it possible to customize your package and re-build it ? There are a lot of commands that are not highlighted. I wanted to highlight the missing commands myself, then this work if you want.

Example Syntax

Like Crypto command :
crypto isakmp
crypto ipsec
crypto map

Thx for reading, have a nice day :)

[heyglen]

Hi,

Your contribution would be very welcome. Please make a push request.

Take a look at the contribution guide

[netify-gmail]

Would like to augment highlighting of 'crypto map' syntax:
(literal IPs replaced with [ip addr])

crypto map outside_map 1 match address outside_cryptomap_3
crypto map outside_map 1 set peer [ip addr]
crypto map outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 2 match address outside_cryptomap_1
crypto map outside_map 2 set peer [ip addr] 
crypto map outside_map 2 set ikev1 transform-set ESP-AES-256-SHA
crypto map outside_map 3 match address outside_cryptomap_2
crypto map outside_map 3 set peer [ip addr]
crypto map outside_map 3 set ikev1 transform-set ESP-AES-256-SHA
crypto map outside_map interface outside
crypto map outside2_map 4 match address outside_cryptomap_1
crypto map outside2_map 4 set peer [ip addr]
crypto map outside2_map 4 set ikev1 transform-set ESP-AES-256-SHA
crypto map outside2_map 5 match address outside_cryptomap_2
crypto map outside2_map 5 set peer [ip addr]
crypto map outside2_map 5 set ikev1 transform-set ESP-AES-256-SHA
crypto map outside2_map interface outside2
crypto ca trustpool policy`

```

[netify-gmail]

Code sample for other 'crypto ikev1' or 'crypto ikev2' syntax:

crypto ikev2 policy 1
 encryption aes-256
 integrity sha
 group 5 2
 prf sha
 lifetime seconds 86400
crypto ikev2 policy 10
 encryption aes-192
 integrity sha
 group 5 2
 prf sha
 lifetime seconds 86400
crypto ikev2 policy 20
 encryption aes
 integrity sha
 group 5 2
 prf sha
 lifetime seconds 86400
crypto ikev2 enable outside
crypto ikev1 enable outside
crypto ikev1 enable outside2
crypto ikev1 policy 50
 authentication pre-share
 encryption aes-256
 hash sha
 group 2
 lifetime 86400

The 'enable outside' (or other interface value) are important to highlight

I wouldn't highlight the sub-entries under (for example) the '... ikev1 policy 50' section in this sample

[netify-gmail]

DHCP code blocks should highlight:

dhcpd auto_config outside
!
dhcpd address [start ip addr] - [end ip addr]  GuestWireless
dhcpd dns [ip addr] interface GuestWireless
dhcpd lease 300 interface GuestWireless
dhcpd domain [domain name] interface GuestWireless
dhcpd option 3 ip [ip addr] interface GuestWireless
dhcpd enable GuestWireless

[netify-gmail]

NTP server IP addresses:

ntp server [ip addr] source outside2 prefer

Group-policy applied:

 vpn-tunnel-protocol ikev1 l2tp-ipsec ssl-clientless
dynamic-access-policy-record DfltAccessPolicy

Username entry:
```username [username] password [pw] encrypted````

Tunnel-group values:

tunnel-group [ip addr] ipsec-attributes
 ikev1 pre-shared-key *****
tunnel-group [ip addr] type ipsec-l2l
tunnel-group [ip addr] ipsec-attributes
 ikev1 pre-shared-key *****
tunnel-group [ip addr] type ipsec-l2l
tunnel-group [ip addr] ipsec-attributes
 ikev1 pre-shared-key *****

[netify-gmail]

Service-object entries:

This line is currently highlighted:
object-group service H323

These are not highlighted:

 service-object object h323_2 
 service-object tcp destination eq h323 
 service-object object h323_1 

[netify-gmail]

This entry is highlighted:
network-object host [ip addr]

This entry is NOT highlighted after the word 'network-object':
network-object [ip addr] 255.244.0.0

Again, this entry is highlighted:
network-object [ip addr] 255.255.0.0

[netify-gmail]

A few inconsistencies with varying syntax:

Highlighted:
icmp permit [ip addr] 255.255.255.0 outside

Missed:
icmp permit host [ip addr] outside

[netify-gmail]

Flow-Export targets:

flow-export destination inside [ip addr] 2055

[netify-gmail]

NAT statements without IP addresses:

Highlighted:
object network [obj name]
nat (inside,outside2) static [ip addr]

Highlighted:
object network spwwup

Missed:
nat (inside,outside2) static interface service tcp ssh 22222

[heyglen]

Hi netify,

I've pushed some of these in v2.31.0.

In the future, please open new issues per request and specify which syntax the commands should be a part of.

/Glen